Action changes information
This augmented VR scenario connects equipment actions with visible system information. Watch the first three steps of soft shutdown.

Change the power command
On the site controller, the power command changes from fifty to zero. The inset shows the voltage response at the same moment.

Inspect the monitor
Pause on the updated monitor. The power command is now zero, and the inverter information has changed.

Watch the voltage points
Now look back at the equipment. The dense, moving points make the remaining voltage cues visible around the enclosures and cables.

Open the AC disconnect
Next, the virtual hand grabs the AC disconnect and rotates the handle to its ninety-degree endpoint.

Read the AC information
The AC and inverter meter displays change after rotation. Take a moment to inspect them before continuing.

Look at the remaining voltage
Look around the equipment again. Compare the voltage points that remain with the information that changed.

Open the DC disconnect
The hand now operates the DC disconnect, following the same deliberate grab, rotate, and release sequence.

Read the DC information
The DC meter changes after rotation. Pause to read the changed values before looking back at the surrounding equipment.

Inspect the voltage response
The corresponding voltage points have disappeared. Other parts retain their cues, making the consequences of this action visible.

Connect actions and consequences
Actions change information, connecting interaction with system feedback.